BMC Auto Cpap G2S Specifications
| Device Size |
| Dimensions |
274 mm × 184 mm × 115 mm |
| Weight |
1.9 kg |
| Water capacity |
To maximum fill line 360 mL |
| Heated Humidifier |
| Humidifier Settings |
off, 1 to 5 (95˚F to 154.4˚F / 35°C to 68°C) |
| Humidifier Output |
No less than 10 mg H2O/L |
| Environmental Conditions |
Maximum airflow, 35°C, 15% relative humidity |
| Product Use, Transport and Storage |
| |
Operation |
Transport and Storage |
| Temperature |
5°C to 35°C (41˚F to 95˚F) |
-25°C to 70°C (-13˚F to 158˚F) |
| Humidity |
15% to 93% Non-condensing |
15% to 93% Non-condensing |
| Atmospheric Pressure |
760 to 1060 hPa |
760 to 1060 hPa |
| Mode of Operation |
Continuous |
| Work Mode |
Auto CPAP, CPAP |
| SD Card |
The SD card can record patient data and fault information |
| AC Power Consumption |
100 - 240 V AC, 50/60 Hz, 2.0 A |
| Type of Protection Against Electric Shock |
Class II Equipment |
| Degree of Protection Against Electric Shock |
Type BF Applied Part |
| Degree of Protection Against Ingress of Water |
IP22 |
| Pressure Range |
4 to 20 hPa (in 0.5 hPa increments), ≤30 hPa under single fault conditions. |
| Static Pressure Stability |
± 0.5 hPa |
| Ramp |
The ramp time ranges from 0 to 60 minutes |
| Sound Pressure Level |
< 28 dB, when the device is working at the pressure of 10 hPa |
| Sound Power Level |
< 38 dB, when the device is working at the pressure of 10 hPa |
| Automatic leak compensation |
The pressure error ≤ ± 1 hPa when the air leakage is no more than 70 L/min. |
| Maximal Optical Output Power |
Less than 1.5 mw maximum average. |
| Tube |
Length: 6 ft. (1.83 m) |
| Maximum Delivered Gas Temperature |
≤ 43°C |
| The Form and the Dimensions of the Patient Connection Port |
The 22 mm conical air outlet complies with ISO 5356-1. |
| Pressure |
| Range |
0 to 20 hPa |
| Margin of Error |
± (0.4 hPa + 4%) |
| Pulse Rate |
| Range |
30 to 240 BPM |
| Margin of Error |
±2% |
| Wavelengths |
| Red |
663 nanometers |
| Infrared |
890 nanometers |
| Maximum Flow |
| Test Pressures (hPa) |
4 |
10 |
15 |
20 |
| Measured Pressure at the Patient Connection Port (hPa) |
3 |
9 |
14 |
19 |
| Average Flow at the Patient Connection Port (L/min) |
85 |
135 |
140 |
140 |
